We design it, send you a proof to your email, you approve and we print and ship. Simple. Easy. Done.
DECALS
Outdoor quality decals, self apply, any size from 2 inches to 52 inches, full color, any shape, gloss, or matte finish. Specify size per each decal and quantity of each.
This requires you to measure the area you plan on applying the decal (sticker) too. then you will know the size and amount of material you will need.
We charge by Square foot (12 inch x 12 inch)
Please fill out the information required, then a proof will be provided to you.
Any additional payment or cost will also be supplied with your proof.
We Ship USPS, UPS Ground. Thank you for your Order!
USDOT State Approved Decals
USDOT truck lettering decals used for registration number stickers are custom made from no-fade premium vinyl which comes with a 5 year guarantee. The premium vinyl has a high tack adhesive and is pigmented through out the material which is great for truck carrier lettering. This is not an ink-jetted decal that will fade in UV sunlight. The USDOT registration number decals come in two different sizes, are sold as a minimum of two and you get one free just in case you make a mistake. Your USDOT registration numbers are pre spaced, ready-to-apply, very easy to install, we provide proofs And once approved these a produced quickly and ready to ship typically within 24 hours after proof approval. We also include a free squeegee applicator and instructions for a smooth, bubble-free application.
We use fonts that are standard block style, these read easily and can be view from 50+ feet away.
If you need only the USDOT & GVW these are 2 lines of text and typically fit into a 6" tall x 18-24" long area
If you need the 4 Lines of text USDOT, VIN, GVW, & MC these come on 4 lines of text and typically fit into an area that is 12" tall x 18-24" long. PLEASE MEASURE THE AREA YOU NEED, TO MAKE SURE THEY FIT. Let us know if they need to be NARROW to fit a certain area. Some Semi trucks have narrow tool doors that are 16-18" and we can adjust to fit this area.
Vehicle Door Logo Decals
Vehicle Door Logos are a simple easy way to advertise your brand everywhere you drive!
We use a premium grade vinyl material that is highly durable to weather, car washes and will hold up for years! Provided are Quantity 2 decals (one per each side of vehicle) Digitally printed multi-color designs with a High Grade Gloss Laminate to protect from scratches and road grime. Die-Cut and ready to apply easily to your vehicle in a simple process. A Vinyl Squeegee applicator tool will be provided with your decals.
Email us your logo or artwork and we will design a proof to show what your door logos will appear like on your vehicle.
Quick production, within 24 hours after proof is approved, you job will begin.
We ship your decals USPS for the fastest and lowest prices.
Trailer Decals
Trailer Decals are a simple easy way to advertise your brand everywhere you trailer goes!
We use a premium grade vinyl material that is highly durable to weather, car washes and will hold up for years! Provided are Quantity 2 decals (one per each side of trailer) Digitally printed multicolor designs with a High Grade Gloss Laminate to protect from scratches and road grime. Die-Cut and ready to apply easily to your trailer in a simple process. A Vinyl Squeegee applicator tool will be provided with your decals. We also include a 3rd logo for the back, as an extra and is sized at 27" Long.
Email us your logo or artwork and we will design a proof to show what your trailer decals will appear like on your trailer.
Quick production, within 24 hours after proof is approved, you job will begin.
We ship your decals USPS for the fastest and lowest prices.
Tools Needed:
Masking tape (2" recommended)
Tape Measure
Scissors to cut the backing liner
Squeegee Applicator tool (Provided in your Box we ship to you)
Xacto Knife or similar for trimming vinyl at seams.
Installation Instructions:
#1Remove the Screws using a #2 Square Bit (found at your local hardware store)
Clean the entire area using Glass Cleaner, Windex or Rubbing alcohol.
#2 Place vinyl graphic up on the side of trailer, tape graphic in place
measure height, width and level graphic to fender or top edge of trailer.
#3 Use tape to create a hinge top to bottom at the center of the graphic. Use additional tape to hold left and right sides of decals. (so you should have 3 pieces of tape holding decal in place, centered left, centered right, and top and bottom in center.
#4 Remove the tape from left or right side, peel back the graphic to center (basically fold in half) remove the backing liner on the half that is folded back all the way to the center top to bottom taped edge, use the scissors to cut the backing paper liner from the exposed sticky part of the decal. Then using the squeegee, holding the decal tight apply the decal to the trailer with up and down strokes from the center out to top and center out to bottom. all the way to the left or right edge.
#5 Repeat this step for the opposite side of decal.
#6Carefully remove the top layer of transfer paper and the masking tape at a 45 degree angle against the trailer side. trim with a knife any seams the vinyl applies over on the aluminum trailer sides.
#7 Re-install the screws with the #2 square bit.
#8 Stand back admire hard work.
#9 Repeat ALL steps for the opposite side of trailer and back door/ramp.
Enjoy, and tow with pride!
Decals - Triple Threat
Number Stickers to match your roof sign or your door wraps.
Printed on high quality outdoor quality digital printed vinyl, gloss finish.
Size is roughly 6" to 8" Inches left to right.
We will show a proof with your design before printing.
These are designed to display your number you race or derby with.
Display them on your personal vehicle, your tool box, in a window....
Multiple quantities available. Custom options available.
We now Have Tumbler Mugs 18oz we can add decals too! (see pictures)
A PROOF WILL BE PROVIDED TO YOU BEFORE PRINTING.
We allow 2 Proofs included in cost shown, additional proofs are $39 Each!
PLEASE VERIFY SIZE, QUANTITY AND DESIGN WHEN APPROVING
There are no Refunds on this item as it is custom designed just for you!
When ordering... 1 in cart you get 3 decals
2 in cart you get 6 decals
These are sold as 3 decals per set!
Tumbler Mugs is an additional set of decals! (one Installed on the Mug)
Bandaid - There, I Fixed It!
Novelty Decal - Laminated and outdoor quality.
Designed to apply to nearly any surface, doors, windows, mugs, equipment, any many other surfaces. NOT DESIGNED TO ACTUALLY FIX ANY BROKEN ITEM.
Novelty decal, designed to be comical and not true.
Sold in a Sheet set Including:
Qty 1) 3.25" x 12"
Qty 2) 1.5"x 6"
Qty 3)1"x 4"
Corona Survivor Decal (Novelty Decal)
Decal 2"x 6" High quality, designed for Indoor/Outdoor use.
Will stick to most flat surfaces.
Designed to be funny and comical thru these crazy times in life.
WARNING - NEVER Put Your Fingers...
Sheet of Decals - laminated finish, outdoor quality, designed to apply to doors, window, cases, mugs, equipment, anywhere you may need a warning sticker.
Designed to be funny, comical and not necessarily true or actual in anyway.
Sheet Includes: Qty 1) 4"x 6.5" Qty 1)2.5"x 4" Qty 3) 2"x 3.25" Qty 3) 1.5"x 2.5"
|
Click on the link above to email artwork to us.
File types accepted are: HIGH RESOLUTION .JPG HIGH RESOLUTION .PDF VECTOR FILES: .AI .EPS .CDR If other file types are provided we may not be able to open your artwork. Additionally if your artwork is provided on a LOW RESOLUTION additional costs may incur. |
Click on the email link above and get a quote of the decals you want, include an attachment of your artwork, let us know the size and quantity you need and we will get a quote back to you within 48 hours.
|
